Long Steel Products — Bars and Rebar

Diameters Ø8 to Ø32 mm, in grades B420C and B500C. Standards TS 708 / EN 10080; in bar and coil form, 12,000 mm long.

Equal angles from 20×20×3 to 200×200×20 mm and unequal angles from 30×20×3 to 200×100×12 mm. Grades S235JR and S275JR, standard EN 10056, lengths 6,000 or 12,000 mm.

From 20×3 mm to 200×30 mm. Grades S235JR and S275JR, standard EN 10058; with hot- or cold-rolled options, 6,000 mm long.

No; square bar is a solid section, a hollow section is hollow. Square bar comes in 8×8 to 100×100 mm sections and is used in wrought iron, railing and machine work.

It is reinforcing steel with ribs on its surface that key it into the concrete. Those ribs stop the reinforcement slipping inside the concrete; ribbed bar is standard in reinforced concrete work.

6,000 mm for square bar, flat bar and angles; angles are also available at 12,000 mm, and rebar is 12,000 mm as standard.

Whichever grade the structural calculation specifies; we hold B420C and B500C in stock. The choice of grade is the decision of the engineer who prepares the project, and we supply the grade specified.

Yes; rebar is available in both bar and coil form. Coil form is preferred in production that runs on cutting and bending machines.