Hollow Section and Pipe Products

Square from 20×20 to 300×300 mm and rectangular from 20×40 to 400×200 mm. Wall thickness 1.00–12.00 mm, grades S235JR, S275JR and S355JR; standard EN 10219.

6,000 and 12,000 mm for hollow sections, and 6,000 mm as standard for galvanised hollow sections. If you need a different length, tell us and we will assess together how it can be solved.

Galvanised pipe is hot-dip zinc coated, black pipe is uncoated. Galvanised is preferred outdoors and on water and fire lines; black pipe in enclosed, dry structural work.

Hot-dip zinc coating of at least 55 µm. Diameter 1/2" – 6" (21.3–168.3 mm), wall thickness 2.00–5.00 mm and standard EN 10255.

From 219 mm up to 2,020 mm. Wall thickness 4.00–16.00 mm, grades S235JR–S355JR and standards EN 10217-1 / API 5L; welded by submerged arc inside and out.

Spiral pipe. It is produced for large-diameter work such as transmission mains, drinking water conveyance and pile casing; at small diameters, black or galvanised pipe is the option.

Black pipe is available with plain or threaded ends. Threaded ends make installation easier in plumbing work; just state what you need when ordering.

Galvanised hollow section. Because it stays outdoors, a coated section is needed; it is available in 20×20 to 100×100 mm sections, 1.00–3.00 mm wall thickness and Z100–Z275 coating.